It's been Fenderized, but still has the body code. Neck plate and other hardware replaced.
TOKAI テレキャスタータイプ ギター - ヤフオク!
TOKAI telecaster type
TOKAI telecaster type electric guitar
Natural body, maple fingerboard
The year is unknown, but it was carefully made and the body had a good sound, so I bought it and replaced the parts to make it look good. However, I will exhibit it because I have too many guitars.
The main body is made of wood at the center and looks good.
The year, materials used, etc. are unknown.
《Parts replacement part》
・Because the head logo was erased at the time of purchase, I applied F company decals and painted only the head part with lacquer.
・Replace both pickups with those of Fender Japan
・Transfer the control panel part together with the assembly from Fender Japan's Telecaster
・Replace the bridge assembly [new (manufacturer unknown)]
・Replace the saddle with brass (new)
・Pegs from Fender Japan・Replace
the neck back plate with a fender (F logo) (new)
・Replace the screw (new)
<<Condition>
> There are no major scratches on the body, but there are minor scratches, hits, buckle scratches, etc. You can see it.
・There is some wobble in the jack plate, but it will not come off even if the plug is pulled out.
・The remaining frets are 8 to 9 minutes
. ・No warping of the neck.
・The strings have been replaced, the frets have been polished, the octave has been adjusted, and the string height has been adjusted.
TOKAI テレキャスタータイプ ギター - ヤフオク!
TOKAI telecaster type
TOKAI telecaster type electric guitar
Natural body, maple fingerboard
The year is unknown, but it was carefully made and the body had a good sound, so I bought it and replaced the parts to make it look good. However, I will exhibit it because I have too many guitars.
The main body is made of wood at the center and looks good.
The year, materials used, etc. are unknown.
《Parts replacement part》
・Because the head logo was erased at the time of purchase, I applied F company decals and painted only the head part with lacquer.
・Replace both pickups with those of Fender Japan
・Transfer the control panel part together with the assembly from Fender Japan's Telecaster
・Replace the bridge assembly [new (manufacturer unknown)]
・Replace the saddle with brass (new)
・Pegs from Fender Japan・Replace
the neck back plate with a fender (F logo) (new)
・Replace the screw (new)
<<Condition>
> There are no major scratches on the body, but there are minor scratches, hits, buckle scratches, etc. You can see it.
・There is some wobble in the jack plate, but it will not come off even if the plug is pulled out.
・The remaining frets are 8 to 9 minutes
. ・No warping of the neck.
・The strings have been replaced, the frets have been polished, the octave has been adjusted, and the string height has been adjusted.
