ES-120 Wiring

Tokai Forum

Help Support Tokai Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Vaughan

Member
Joined
Aug 12, 2009
Messages
14
Reaction score
0
Location
Oxfordshire UK
Hi,
Does anyone have, or know where I can find a schematic for the ES-120 for reference. I've tried to work it out with a mirror through the "f hole" but the wires are a bit tangled.
This is just in case anything breaks.

Thanks
 
Try this:

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2h_2v_2t_3w

There are loads of wiring diagrams on the SD site.
 
http://www.gibson.com/Files/schematics/sheratonII%20wiring.JPG

Try this link, I found the Epi diagram the most easy to follow

I re-wired a Tokai ES 130 recently with CTS pots and Tonerider pickups - here is a link to the page I made to illustrate it.

http://www.kevinyates.com/ES_335_re-wire/index.html

Good luck
 
Hi Kevcaster

This schematic looks just the job. I've had a look at your photos and I've made somenote for future use.
I had problems with the common ground but the fault has been cured by tightening all the control nuts.

Thanks for your help
 

Latest posts

Back
Top