Tokai Forum - a subsidiary of TokaiRegistry.com Forum Index
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Greco no serials
Goto page 1, 2, 3, 4  Next
 
Post new topic   Reply to topic    Tokai Forum - a subsidiary of TokaiRegistry.com Forum Index -> Greco
View previous topic :: View next topic  
Author Message
japanstrat
Guitar God


Joined: 23 Sep 2006
Posts: 879

PostPosted: Tue Mar 04, 2008 8:43 am    Post subject: Greco no serials Reply with quote

There are Greco no serial Mint Collection guitars made by Cor-Tek (Cort) with shielding paint and brick shaped (no slope nuts) and most have Cor-Tek (Cort) pots http://forum.japanaxe.com/phpBB3/viewtopic.php?f=20&p=7602 http://www.tokaiforum.com/viewtopic.php?t=4993&start=225. Then there are other no serial Grecos that are very different and have no shielding paint and have the usual sloped nut and have fret edge binding and have a EGC-75 model stamped in the pickup cavity and square shaped pickup cavity routing holes and these are made by Tokai http://www.tokaiforum.com/viewtopic.php?t=4993&postdays=0&postorder=asc&start=210 http://img.villagephotos.com/p/2005-3/981757/GRECOSERIAL.jpg.

I've traced the Tokai Square Holes back to late 70s Tokais up to the present and also to the late 70s Burnys that have a Tokai serial number and were made by Tokai and also to some of the Greco no serials that were made by Tokai and also to more recent 2007 Burnys that were made by Tokai and even to some (Martin) Sigmas that were made by Tokai in the 70s.

It's amazing to think that Tokai Japan are currently using the same routers that they were using in the late 70s.

Tokai pickup routing holes and diagonal wiring channel.





Greco no serial EGC-75 pickup routing holes and diagonal wiring channel.





Fret edge binding





No serial





Last edited by japanstrat on Wed Feb 18, 2009 5:09 am; edited 3 times in total
Back to top
View user's profile Send private message
pimphat
I only know 3 chords


Joined: 07 Oct 2007
Posts: 25
Location: New Jersey USA

PostPosted: Wed Mar 05, 2008 5:55 am    Post subject: Reply with quote

OK, Interesting. So do the Tokai made Greco's come from a different factory then Fujigen Gakki?

here's mine again:
Back to top
View user's profile Send private message
japanstrat
Guitar God


Joined: 23 Sep 2006
Posts: 879

PostPosted: Thu Mar 06, 2008 7:07 am    Post subject: Reply with quote

Yes. Tokai have their own guitar factory in Japan. The Tokai made Grecos are made in the Tokai guitar factory in Japan which is where the Tokai guitars are made. So Tokai have made your guitar for Kanda Shokai who own the Greco brand. Also what's interesting about it is that these Tokai made Grecos have no serial numbers. So there are Japanese made Burnys with no serial numbers and Japanese Tokai made Grecos with no serial numbers and the Japanese Terada made K Orvilles with no serial numbers (they do have a sticker serial number). So the theory that guitars with no serials are Korean is just BS. I can only find one of the vintage Japanese guitar brands with no serials that are Korean and that's the Cor-Tek (Cort) made no serial Grecos.
Back to top
View user's profile Send private message
pimphat
I only know 3 chords


Joined: 07 Oct 2007
Posts: 25
Location: New Jersey USA

PostPosted: Thu Mar 06, 2008 8:01 am    Post subject: Reply with quote

thats great info! thanks!
Back to top
View user's profile Send private message
sneakyjapan
Guitar God


Joined: 12 May 2003
Posts: 1871

PostPosted: Thu Mar 06, 2008 8:08 am    Post subject: Reply with quote

so japanstrat...you think this applied to Grecos made this decade? I picked up a GT950S this past weekend...Greco Traditional 950 Standard...and took a few quick picks. I`d be interested to know what you think...it has MIJ pots and from my books I learned it has DRY II p`ups. It has one of the tightest tenon joints I`ve ever seen on any of my Les Paul types. No serial number and 3 screw rod cover...staff assured me it was certainly MIJ. Great neck...feels a bit fatter than my Gibso 50s neck...and up to the construction standards we`ve come to expect from well made MIJs. Shop staff saie they are out of production and they had this one at 40% off...it was an offer I couldn`t refuse.
Here`s a few pics...

sorry pic is not clearer...broke my own rule #1...never take only one pic of anything...next time I change strings I`ll get better pics...






Back to top
View user's profile Send private message
sneakyjapan
Guitar God


Joined: 12 May 2003
Posts: 1871

PostPosted: Thu Mar 06, 2008 8:29 am    Post subject: Reply with quote

just found this bit about my 950S...

http://www.kandashokai.co.jp/greco/l_gt950s_crs.html
Back to top
View user's profile Send private message
japanstrat
Guitar God


Joined: 23 Sep 2006
Posts: 879

PostPosted: Thu Mar 06, 2008 8:33 am    Post subject: Reply with quote

Well I don't have any guitars to compare it to that I know are made in Japan this decade but any guitar that has "Made in Japan" pots points to a Japanese origin. Korean or Chinese made guitars would not usually use "Made in Japan" pots as they can be sourced locally from Korean or Chinese electronic manufacturers and at a cheaper price. I've seen those exact type of pots with "Made in Japan" on them on Japanese Tokais and other Japanese made guitars as well. Also the price of the guitar points to it being Japanese made.
Back to top
View user's profile Send private message
sneakyjapan
Guitar God


Joined: 12 May 2003
Posts: 1871

PostPosted: Thu Mar 06, 2008 8:54 am    Post subject: Reply with quote

a few minutes after posting the question I was looking at my watch list on yahoo Japan and saw someone selling the GT830S and he had a link and I followed it and found the one that I posted about mine... he said his was MIJ. The shop staff assured me mine was MIJ...but I`m never sure about what I`m told here... and I was thinking about the no serial MIJ link...and you may be onto something...at least for Grecos of this decade.
plus, some folks seem to think 3 screw rod covers are all MIK too...but I see pics in my books going back to the 70s with Grecos with 3 screw rod covers, so they`ve been doing that for a while. You know the more research I do on MIJs the more I realize it ain`t an exact science.
Back to top
View user's profile Send private message
20 century boy
Guitar God


Joined: 06 May 2003
Posts: 1091
Location: Paris

PostPosted: Thu Mar 06, 2008 10:28 am    Post subject: Reply with quote

Yes many MIJ Greco have 3 screws truss rod covers,in the 70's/ 80's and 90's. Even very High end models with nitro finish ( wich I doubt can be made in Korea).
_________________
nankurunai sa!
Back to top
View user's profile Send private message Send e-mail
sarge40
Guitar God


Joined: 13 Sep 2007
Posts: 47
Location: NY, USA

PostPosted: Wed Mar 12, 2008 10:33 pm    Post subject: Reply with quote

In regards to the pics posted by JS, would you say for certain that this type of routing, without the shielding paint, is definitely MIJ. Did they ever rout like this on the MIKs, or were MIK Grecos always the "octagonal", shield painted routs?

Also, is that a deep tenon? I have a Greco with the same tenon. It looks like a semicircular rout where the tenon stops at the pup cavity, with no tenon inside of the pup cavity or the rout, so its not the "extended" long tenons which go completely into the cavity (or is it indeed a "deep tenon"?).

Mine has no markings whatsoever, serial number or otherwise printed in the pup cavity, but is otherwise identical to those pics in regards to the routs and tenon, with fret edge binding, and would like to think it is MIJ.

What say ye experts?


Last edited by sarge40 on Sat Apr 26, 2008 12:54 pm; edited 1 time in total
Back to top
View user's profile Send private message
japanstrat
Guitar God


Joined: 23 Sep 2006
Posts: 879

PostPosted: Thu Mar 13, 2008 1:23 am    Post subject: Reply with quote

The MIK Cort Grecos have distinctive routing like you say and they often have Cor-Tek pots. A guitar doesn't get installed with Cor-Tek pots unless it's coming out of the Cort factory. The Tokai and the no serial Grecos above are being routed by the same routing machine. The Square routing holes on the bottom of the pickup cavity are exactly the same. Usually the routing holes on the bottom of the pickup cavity are rectangular in shape for most other factories like Fujigen etc. If your Greco matches the routing above and it has fret edge binding then it would be a Tokai made Greco and the stamp has either faded or been removed or just not stamped in the first place. The tenon above is what I call a medium tenon which is the same as the 1970s Gibson tenon before Gibson went to a short tenon. The semi circular tenon hole in the pickup cavity was just not used but could have been used for what I call a medium long tenon. A long tenon is just like a medium long tenon except it extends even more into the pickup cavity. Where they are made also depends on price. The no serial Tokai made Grecos were at least 10,000 or 20,000 Yen higher in price than the Cort made Grecos. This is around 1988 and guitars were only being made in Korea around that time because it was cheaper to do and therefore the retail price would have been lower than a MIJ equivalent guitar. It's pretty obvious that the Greco no serial guitars were made because Fujigen lost interest in making set necks in the late 1980s, especially low priced set necks as the labour costs/profit returns ratio on the low priced guitars would be the lowest, so Kanda (Greco) looked around at other guitar makers to make them.
Back to top
View user's profile Send private message
Krank
Sus4add11


Joined: 06 Mar 2008
Posts: 40

PostPosted: Thu Mar 13, 2008 6:19 pm    Post subject: Reply with quote

http://imageevent.com/chingo123/grecolpcstmblack2942

How does this one fit in the picture? No serial, open 'o'. It has different pup cavity routing from the above, but fret edge binding.
Back to top
View user's profile Send private message
japanstrat
Guitar God


Joined: 23 Sep 2006
Posts: 879

PostPosted: Thu Mar 13, 2008 11:27 pm    Post subject: Reply with quote

I don't think it's a Tokai made Greco. I compared it to a Cort made Greco custom and it is very different. Different routing different fingerboard inlays etc etc so I don't think it's a Cort made Greco. Here is a Cort made Greco custom http://cgi.ebay.com.au/Greco-80-90s-LPC-LP-Custom-Black-Beauty-Guitar_W0QQitemZ190204012964QQihZ009QQcategoryZ2384QQssPageNameZWDVWQQrdZ1QQcmdZViewItem I'd have to see the control cavity and pots before I could come up with something. It seems to have wiring channels and pickup cavity routing like Fujigen does but Fujigen wouldn't be using a brick shaped nut if it is the original nut. But it doesn't look totally like a Fujigen Greco to me so I'd have to say it's maybe a Cort made Greco with different routing. Maybe Cort got a new routing machine. It's still got Cort like yellowish binding (although it's hard to tell by the images) and the brick shaped nut. Could be Fujigen parts sent to Cort for finishing. I don't really know. I would have to look at the control cavity and pots for a better opinion. The guitar seems to have Japanese and Korean elements. It's also originally priced at 60,000 Yen which is what the Cort made Greco customs were priced at so I'd say it might be Fujigen parts sent to Cort in Korea and Cort then finished it and sent it back to Japan with all the other Cort made Grecos. It wouldn't make great economic sense to ship Japanese parts to Korea as they cost more to make in Japan and also they would have to be shipped back to Japan so they would have double shipping charges but in the Grecos case it might make sense to ship some parts from Fujigen in Japan to Cort in Korea because Cort were already making some Grecos and the few shipped parts from Japan would just come back to Japan with all the other Cort made Grecos. Maybe.
Back to top
View user's profile Send private message
sarge40
Guitar God


Joined: 13 Sep 2007
Posts: 47
Location: NY, USA

PostPosted: Sun Mar 16, 2008 9:10 pm    Post subject: Reply with quote

Here are some pics of my Greco I mentioned in an earlier post. I forgot to take a pic of the fret edge binding, but it has it. Also, see how there is no stamp in the neck pup rout. It had MIJ pots in it before I changed them out with an RS kit. I'm posting pics of some of the areas that are commonly called into question when the MIJ vs MIK issue comes up.

Headstock:


Pickup rout:


Another shot of the rout:


Nut:


So, with these pics in mind, is it safe to say this is a Tokai-manufactured Greco?
Back to top
View user's profile Send private message
leadguitar_323
Guitar God


Joined: 14 Nov 2006
Posts: 3534
Location: Brisbane Australia

PostPosted: Sun Mar 16, 2008 9:23 pm    Post subject: Reply with quote

That front pickup route/ neck end route definately looks like its Tokai..
Also the offset neck joint is a tokai thing as well.

Mick
_________________
so many guitars....so little money...
Back to top
View user's profile Send private message MSN Messenger
Display posts from previous:   
Post new topic   Reply to topic    Tokai Forum - a subsidiary of TokaiRegistry.com Forum Index -> Greco All times are GMT - 6 Hours
Goto page 1, 2, 3, 4  Next
Page 1 of 4

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group