Bacchus replacement bridge and tailpiece

Tokai Forum

Help Support Tokai Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jun 20, 2019
Messages
9
Reaction score
0
Location
United Kingdom
HI,

After months of researching and searching I have just bought my first Bacchus (Classic model) and am eagerly awaiting for it to arrive. I was wanting to change the tailpiece and bridge to an aged version ideally from Faber or Gotoh. Can anyone recommend whether these bridges are metric or imperial sizes? I read somewhere that they are the same as Gibson uses?


Any advice would be great


thanks
 
as far as the tail piece you could go with the GOTOH GE101A. These are metric, for MIJ guitars, and I don't believe these will fit a Gibson.

here is a thread I started for a similar issue
http://tokaiforum.com/viewtopic.php?t=24423&sid=07d44a724c52989cd6da6c99b0d7859e

I purchased three GOTOH GE101A tail pieces: one in nickel, one in gold, and one in aged nickel aka 'relic.'
Each piece comes with the two posts & the two post anchors.

Sorry; can't help on the bridge. Good luck :)
 
I got in touch with a Gotoh supplier here in the UK and he said any bridge made in Japan should fit.

He suggested this one to go with the aged Gotoh tailpiece

https://www.gluedtomusic.com/products/257/gotoh-ge104b-vintage-abr-1-style-tune-o-matic-bridge-aged-relic-nickel/


Hope that helps mate
 

Latest posts

Back
Top