Core Beam noise as soon as guitar cable is plugged

Tokai Forum

Help Support Tokai Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

spadekevin

New member
Joined
Jun 28, 2018
Messages
1
Reaction score
0
Location
newyork
Hi,

The moment I plug a guitar cable into the Beam, I get a continuous static background noise. It somehow sounds a bit like 1/f noise. It is too low in frequency to be white noise, at least as far as I can tell. I do not even have to plug a guitar or a pedal to the other end of the cable, the noise is always there as soon as the ammp is switched on. Even turning the volume to 0 does not make it go away.
As a reference I plugged a Yamaha THR10 to the same power rail and the problem did not appear there.
Is this by design of the amp (I hope not) or is there something to do that can fix this?

Please help.

I didn't find the right solution from the Internet.

References:-
https://www.blackstaramps.com/forum/viewtopic.php?t=5366
Sales Management Software Example

Thanks!
 

Latest posts

Back
Top