Loudmouse
Well-known member
Just got a set of these out of an Ibanez hollowbody and was wondering if anybody had some info.
V2 stamped in brass baseplate, Maxon type ink code of 200925 and also a larger letter "S" in ink. Very rare Dry S haha.
Look like double row hex pole pieces but are actually round holes with a notch for flathead screwdriver. Weirdness.
They are Dimarzio Super Distortion double cream copies but these ones are 3 wire and a shield like the old Dual Sound.
Red, white and black wires plus shield.
They ohm out around 16 black wire and shield with red and white connected, but is that the standard wiring for regular humbucking operation?
Anybody know the correct standard wiring on these?
Thanks
V2 stamped in brass baseplate, Maxon type ink code of 200925 and also a larger letter "S" in ink. Very rare Dry S haha.
Look like double row hex pole pieces but are actually round holes with a notch for flathead screwdriver. Weirdness.
They are Dimarzio Super Distortion double cream copies but these ones are 3 wire and a shield like the old Dual Sound.
Red, white and black wires plus shield.
They ohm out around 16 black wire and shield with red and white connected, but is that the standard wiring for regular humbucking operation?
Anybody know the correct standard wiring on these?
Thanks