-
If you have bought, sold or gained information from our Classifieds, please donate to Tokai Forum and give back.
You can become a Supporting Member or just click here to donate.
bobbin color
- Thread starter schmintan
- Start date
Help Support Tokai Forum:
villager
Well-known member
screw the pole piece right down and look...
- Joined
- Dec 5, 2013
- Messages
- 1,187
- Reaction score
- 253
couldn't tell you what bobbin color(s) to expect but if you are taking the covers off, then there is no need to guess; you will know when you have the covers off. :wink:
If however you don't want to take the covers off you could,
(1) remove one of the adjustable screw poles (be sure to remove any wax as the wax typically looks white & you could end up thinking you have a white bobbin when it may just be wax you are viewing)
(2) remove one of the bobbin screws on the base, for the slug bobbin
(3) if the lead wire hole diameter is big enough you could determine the color of at least one bobbin by looking into the hole in the base where the lead wire transits the base
good luck
If however you don't want to take the covers off you could,
(1) remove one of the adjustable screw poles (be sure to remove any wax as the wax typically looks white & you could end up thinking you have a white bobbin when it may just be wax you are viewing)
(2) remove one of the bobbin screws on the base, for the slug bobbin
(3) if the lead wire hole diameter is big enough you could determine the color of at least one bobbin by looking into the hole in the base where the lead wire transits the base
good luck
