Tops ??? Sycamore vs Maple

Tokai guitar discussion

Moderators: ian, ned

Paladin2019
Guitar God
Posts: 2140
Joined: Fri Sep 06, 2002 5:35 pm
Location: Cardiff, UK

Post by Paladin2019 » Mon Jun 07, 2004 3:30 am

Steve250SWB wrote:"Don't be daft, ..............."

But the whole thing is daft. Glue = bad? So what does a nice smooth coat of lacquer equal? :-)
Yup, that's bad too. A tech I know used to work at Patrick Eggle before they went down the drain and he told me about an experiment that PE did. They took 4 guitars and tried different finishes on them - unfinished, nitro, poly and polyester. They sounded best in that order, but unfinished guitars are uncommon for obvious reasons.

So a veneer + glue is going to make that restrictive layer even thicker, and glue probably has worse tone properties than polyester.

The question here is does that extra layer of glue make a difference in tone. My answer was that if it does (it may not, given everythig else that's going on) then the effect of adding the veneer would be bad. Does that sound reasonable?

guitarboy
Guitar God
Posts: 137
Joined: Sun Dec 09, 2001 6:00 pm

Post by guitarboy » Mon Jun 07, 2004 5:50 am

Also worth pointing out that the LS60 (plain maple cap) guitars have 3 peice mahogany body whereas the LS70 (veneer types) have a two peice
mahogany body.

So does the extra glue in the mahogany back have as big an effect as the extra glue for the veneer ???

Given that the mahogany is the major contributor to the tone (being much thicker) I would prefer fewer glued peices on the back. I think there is a fair case for arguing that the veneer is no different tonally to say a gold paint finish.

Blimey!

GB

ArthurS
Guitar God
Posts: 240
Joined: Wed Apr 30, 2003 11:10 am
Location: The Netherlands
Contact:

Post by ArthurS » Mon Jun 07, 2004 4:20 pm

Novosel wrote:Scott Lentz, the well known and highly respected luthier from California, has refinished early fifties Les Paul Goltops with bookmatched flame maple veneer, converting them to late fifties specs. I'd say if it's OK with him, knowing his reputation, it should be acceptable for us.
That's right. I read someone on the Les Paul Forum who had a similar thing done to (I think) a 1953 Les Paul Goldtop. It was redone to 59 specs and was fitted with a thin flamed veneer. According to both the guy that made it (might have been Lentz) and the guy who owned the guitar, the veneer was completely 'sonically transparent'.

quilt top
Plucker
Posts: 14
Joined: Fri Oct 10, 2003 6:42 pm

Post by quilt top » Fri Jun 11, 2004 8:00 pm

You guys are starting to sound like the LPF..lol.

Paladin2019
Guitar God
Posts: 2140
Joined: Fri Sep 06, 2002 5:35 pm
Location: Cardiff, UK

Post by Paladin2019 » Sat Jun 12, 2004 5:01 am

I don't think we're into flame wars over different brands of capacitor yet. :lol:

luis
Guitar God
Posts: 2426
Joined: Sat Sep 15, 2001 6:00 pm
Location: Spain

Post by luis » Sat Jun 12, 2004 5:07 am

:lol:

I think not.

sneakyjapan
Guitar God
Posts: 1871
Joined: Mon May 12, 2003 9:56 pm

Post by sneakyjapan » Sat Jun 12, 2004 7:45 pm

My 1978 LS 60 Les Paul Reborn has a 2 piece body.

guitarboy
Guitar God
Posts: 137
Joined: Sun Dec 09, 2001 6:00 pm

Post by guitarboy » Mon Jun 14, 2004 5:30 am

Yeah but I think we'd all agree that a '78 LS60 reborn is a very different beast to an 80's onward love rock LS60 which is what I was talking about.

From somewhere in the eighties the LS60 was specced with 3 peice backs whereas the LS70's have two.

Capacitors!!!!! don't even go there :evil:

:wink:
GB

ian
Guitar God
Posts: 834
Joined: Wed Aug 13, 2003 11:46 am
Location: London

Post by ian » Mon Jun 14, 2004 3:32 pm

Old LS60?s typically have 2-piece, or sometimes 1-piece, body, I?ve never seen one with 3-piece :-? . Incidentally, early Fenders sometimes have 6-piece bodies (eg 1950 Broadcaster, 51 No Caster & early 50?s Tele?s) :o . And of course, later Gibbo?s are shot full of holes :wink: .

Ian.

peacock72
Guitar God
Posts: 90
Joined: Fri Jul 25, 2003 10:32 am

Post by peacock72 » Mon Jun 21, 2004 11:26 am

I had a MIK LE 2001, which allegedely had a solid two piece Sycamore top. Sounded like a Les Paul. However, it did sound far more restrained and had a bit less bite than my LS 200. But then again the differences between the 2001 and the LS-200 are fairly great so... :roll: As was previously stated, Sycamore is part of the Maple family and is in high supply in Asia.

Post Reply